New wheel’s come to life

I wondered if Merry knew that change was in the air. Starting from the gate, the clouds were grey and heavy, and the wind was fresh, bordering cold. I wasn’t particularly motivated to go cycling with the imminent threat of rain, and as I started to climb the first hill the rear gear’s started randomly slipping across the lower cogs whenever I stood and put pressure on the pedals. I stopped a couple of times to see if I could twiddle the barrel shifters to improve things, but a few Km down the road the real problem became clear. My rear gear cable snapped clean off at the shifter hood.

After a few moments tidying the mess, I turned for home, with the joy ahead of tackling the nasty Yonder Hill climb on my patched up 2 speed – the new gears being hard, and harder. It wasn’t yet 2pm though, and Helder Cycles would still be open. Despite the less than enticing riding conditions, I figured rather than waste the afternoon I could nip by and hopefully get the cable replaced and gears fixed. Luckily they weren’t too busy, and less than an hour later I was pedalling back up the R44. It took a lot of effort to ignore the slip road at the top of the hill and suppress the urge to head home to a warm couch and some trashy TV.

Merry behaved the rest of the ride, and although the threat of rain never diminished, it also never quite arrived either. Just spots here and there, but nothing to make me want to put my horrible sweaty, non-breathable rain jacket back on. I resolved to go online that evening and actually order the wet weather gear that I’d been slowly mulling over for a week or two.

Closing the garage door, I also wondered how often I’d be riding Merry again. With all the components now arrived, tomorrow would be build-up day for the new bike. Maybe the broken cable was just coincidence – but in over 4 years Merry had delivered trouble free riding. It’s bizarre for a breakage to happen the day before the new ride came together,

Pictured left is William of William’s Bike Shop part way through the build-up process.

As it turned out, the new bike wasn’t quite completed in one go on the Monday. The one component I had decided not to buy purely from internet research was handlebars, and sure enough that was the one item none of the local suppliers had stock of any of my preferred choices. In the end we decided to put a standard 42cm Giant bar on as a stopgap for now to let us complete the build and replace it with something fancier later.

The remainder of the build was completed on the
Thursday, with relatively few hiccups – just the odd screw thread not quite reamed out fully, but all things that William had the tools to sort out.

I’m not a weight weenie, but it was also a pleasant surprise to see how light the complete build had come out – a reasonably svelt 8.3kg. That will go up of course when the light race wheels and saddle are swapped out for their more durable and comfortable audax counterparts.

It was very hard to contain my excitement on the first ride. At last the new bike was a whole machine – not just a pile of components and dreams lying around in boxes on my office floor. That lighter weight was immediately noticeable on the first few climbs. Combined with the stiffer frame it made for a lively and spirited feel. Just the merest extra surge on the the pedal and she leaps eagerly forward, ready to race. The riding position is also quite different, although it felt very natural over the short 30km test ride I did with Marleen. It seems that Justin may have been right about my saddle height – William’s setup ended up very close to the 74cm bottom bracket to saddle top height he had predicted. The lower 72cm setup on Merry had occasionally felt cramped on recent rides, but it’s surprising it felt good at all.given how large a jump in saddle height 2cm is. I’ve also got a hunch that William was right about me needing a seatpost with more lay back. It’s only marginal, but I did find myself pushing out over the back of the saddle to get into a natural and powerful pedalling position.

That’s tweaks and fine tuning for the future though – for now, I’m greatly looking forward to putting some solid kilometres under Jolly‘s wheels. Oh yes, the name, Jolly. That was in fact my first choice, but my impression Dad’s gang had the nickname of The Jolly Boys proved to be mistaken. That minor detail doesn’t really seem to matter now though – those first few turns of the cranks put such a huge smile on my face that Jolly is clearly the perfect name. And it’ll still be a memory and link to dad, regardless of it only making sense because of my faulty memory.

All photographs by author.

Please follow and like us:

Leave a Reply

Your email address will not be published. Required fields are marked *